ENDLESS CONFIGURATIONS
Extremely versatile. Configure the sled for any camera on the market: ARRI, Blackmagic, RED, Sony Venice and more. Strong, rigid and lightweight.
The modular design is easy to modify, upgrade and maintain. The interchangeable post lets you switch to 1.75" for accessories like the Steadicam Volt, or stay with the 2" post for Cyclo, Omega and most remote heads.
universal dovetail receiver
Our TopStage takes most dovetails on the market, including standard ARRI plates and Steadicam plates like GPI, XCS, Betz, Smart System, Tiffen Steadicam M2 and more.
Versatility and compatibility, right at your fingertips.
Ultimate control and stability with fore/aft and side-to-side adjustment
Fore/aft and side-to-side controls let you fine-tune weight distribution for perfect dynamic balance. Smooth, stable, vibration-free shots.
LOW PROFILE TOPSTAGE
Our low-profile design shortens the distance from the dovetail to the gimbal for better overall performance.
Built-In Electronics
.png)
Main Power Output:
1x LEMO 2B 3-pin, 12V/24V (main camera power)
Accessory Power Outputs:
1x LEMO 1B 3-pin, 12V/24V
2x LEMO 0B 2-pin, 12V
Video Inputs:
2x 12G HD-SDI
TOPSTAGE ROTATES
Mount the electronics on the front or the back.
MAXIMUM PRECISION GIMBAL
Machined from 7075 aluminum on a 5-axis CNC to the tightest tolerances, our gimbal uses hybrid Swiss bearings with dry ceramic balls and stainless steel for friction-free movement. Super smooth, perfectly centered and play-free, with a large knurled grip and a tool-free clamp placed so it never gets in the way of the operator's hand.
180 DEGREES
SWIVEL
The rosette system lets the monitor and batteries swivel 180° with a secure lock, for a stable, vibration-free setup.
To increase panning inertia, extend the telescopic rods and slide the center battery back and forth. Mounting the rods sideways helps balance the weight on every axis.
High-Capacity System Power Supply
A high-capacity power system that runs at 12V or 24V. At 12V, the power modules take 2 or 3 hot-swappable batteries.
24V Operation (Series Power):
-
24V comes from connecting two 12V batteries in series.
-
Place one battery in the dedicated 24V slot and the second in any other available slot.
DUAL BATTERY MODULES
The EVO can mount two power modules at once, one on the front and one on the back. The center single-battery plate removes easily to make room for a pendulum.
Interchangeable 2 to 1.75" Carbon Fiber Post
The ultimate solution for versatile camera stabilization. Switch from a 2" post to a 1.75" post in just 30 minutes.
Our 50 mm wide, 2-section carbon fiber post delivers maximum rigidity and stability, and extends up to 120 cm for smooth transitions between high mode and low mode.
You can also order the sled with our 1.75" post, designed to fit the Steadicam M2 gimbal with the Steadicam Volt kit.
Get an extra 1.75" or 2" post and swap it in 30 minutes with basic mechanical skills.
Find the monitor's perfect center of gravity with the side-to-side adjustment. Fits 6" to 8" monitors using their 1/4" side holes, with tool-free adjustment. Mounts on the center or lower post, or on our standard 19 mm battery rods.
MONITOR MOUNT
